Demo. Halvorsen Pumpworks is a fictional business, made to show what 3D Viewer Premium can do.How this page is built

In Drammen since 1987

[email protected]

Orders placed before 2 pm leave the same day.

GP range · Drammen

Gear pumps, and the genuine parts to keep them running.

We have cast and machined the GP range in Drammen since 1987. Every pump ships with its 3D model and CAD files, and every spare part ships within 48 hours.

This is a GP-40 with its front cover off. Drag to turn it. The gears run slowed right down, so you can follow the teeth.

Model

GP-40

Flow at 1,450 rpm

40 L/min

Max pressure

25 bar

1987

Cast and machined in Drammen since

48 hours

Every spare part ships within

4 to 400 L/min

Flow from

25 bar

Pressure up to

Spare parts

Every part has a number. Tap it to order.

Find the worn part on the model, check its number against the plate on your pump, and add it to your basket from the pin. Press the explode button to see how the pump goes together.

HP-FC40

Front cover

$98.00

Machined cast iron with the seal housing. Swap it if the seal bore is scored.

HP-SK40

Shaft seal kit

$32.00

Lip seal, O-ring and four bronze bushes. The first thing to change when oil weeps at the shaft.

HP-GS40

Gear set

$185.00

Matched pair, ground after hardening. Always replace both gears together.

HP-GK40

Cover gasket

$6.50

1.2 mm fibre. Fit a new one whenever the cover comes off.

HP-BK40

Cover bolt kit

$9.00

Six M10 × 60, grade 8.8. Torque to 45 Nm in a cross pattern.

GP-40 pump set

Check the footprint before the pallet arrives.

This is the GP-40 pump set: pump, 3 kW motor and coupling guard on a common baseplate. The real-world dimensions stay on the model as you turn it.

840 mm

long

300 mm

wide

305 mm

high

Leave 300 mm behind the motor fan for cooling air.

Anchor bolts: four M12, on 780 × 240 mm centres.

Need the exact outline? The CAD files below are dimensioned in millimetres.

STEP · STL · OBJ

For engineers: open the CAD files here.

STEP, STL and OBJ open right in the page. No plug-in, no account. Pick a file below the viewer, turn it, then download it with the button in the corner.

STEP

Test part CTC-01

A machined test part in AP203 STEP. Exact geometry, ready for your CAD system.

STEP

Test part FTC-06

A second STEP part with pockets, bosses and holes.

STL

GP-40 drive gear

A mesh for 3D printing a fit-check sample. Millimetres.

OBJ

GP-40 front cover with bolts

A mesh for renderings and layout drawings. Millimetres.

The two STEP files are public test parts from the U.S. National Institute of Standards and Technology, used here to show real CAD data. We do not offer IGES; ask us if your system needs it.

Spare parts shop

Spare parts, in stock in Drammen.

Orders placed before 2 pm leave the same day. Open any part and tap View this part in 3D to check it before you buy.

Request a quote

Specifying a pump for a new line?

Send us the liquid, the flow and the pressure. An engineer replies within one working day with a pump, a drawing and a price.

Flow from 4 to 400 L/min

Pressure up to 25 bar

Oils, fuels, glycols and resins

ATEX motors on request

3D Viewer Premium

How this page is built

Every 3D section on this page is the standard 3D Viewer block. The settings below use the control names you will find in the plugin.

SectionWhat it usesSettings
How it worksModel animation, workshop HDR lightingAutoplay on: the GLB’s own clip turns the gears. Environment Image = workshop HDR, Exposure 1.05
Spare partsExploded view, 5 Product hotspots, 1 Link hotspotExploded View on, distance 80, grouping by node. Hover Popup Card. Pin Icon: Cart and Link. Each Product hotspot points at a WooCommerce product
FootprintReal-world dimensions in the viewerDimensions Always, mm
CAD filesAdvanced viewer, 4 files, Download buttonViewer = Advanced (Online3DViewer) for STEP, STL and OBJ. Multiple models with thumbnails, Download button on, edges drawn
Spare parts shopWooCommerce products, 3D popup on the product pageThe WooCommerce [products] shortcode. Each product has a Popup 3D Model opened by a link with the class view-in-3d
Page designFonts, colours, header and footerPage CSS only. The viewer buttons and pins are restyled with CSS; the plugin settings are unchanged

What this page does not do

  • The pump models are simplified for this demo. They are not certified drawings.
  • The STEP files show geometry only. Tolerances and notes stored in a STEP file are not displayed.
  • Measurements and pins hide while the pump is exploded.
  • The 3D popup opens on the product pages, not in the shop grid.
  • The quote buttons are placeholders; there is no form behind them.

Model credits

  • GP-40 pump, cutaway, pump set and spare parts: made by bPlugins for this demo, CC0
  • CTC-01 and FTC-06 test parts: NIST MBE PMI Validation and Conformance Testing project, U.S. Government work (public domain in the U.S.). Shown as sample data; no endorsement by NIST
  • Workshop HDR (machine_shop_02): Poly Haven, CC0
Scroll to Top