See the heat pump
on your wall
before we drill a hole.
Our installers fit air-source heat pumps and solar panels across the county, right first time. Turn the unit, then put it on your own wall with your phone: it opens at real size.
Free survey
No obligation.
On a phone, tap AR. On a computer, the AR button shows a QR code.
Clearances
Leave it room to breathe.
Real-world dimensions
The model shows the unit’s real-world dimensions, brackets included. A heat pump moves a lot of air, so it also needs space around it. These are the gaps our surveyor will look for.
300 mm
from the coil to the wall behind
1,000 mm
clear in front of the fan
250 mm
to the side with the coil
500 mm
on the pipe side, for servicing
Clearances vary by model and site. Your survey sets the final position.
Inside
What is inside the box.
Tap a numbered pin to read what each part does. The play pin opens a short clip of the fan running.
01
Low-noise fan
A 3-blade fan behind a guarded grille. Tap play to watch it run.
02
Evaporator coil
Thin aluminium fins on the side and back pull heat from the outside air, even at minus 20 °C.
03
Inverter and controls
Behind the service cover. The inverter slows the compressor down instead of switching it on and off.
04
Flow and return pipes
Water goes out to the radiators and comes back here. We lag every pipe outside.
05
Wall brackets
Galvanised brackets with rubber feet, so the wall does not hum when the unit runs.
A turbine only pays back where the wind is strong and steady. We measure your site first.
Wind
A small turbine for an exposed site.
On a windy hillside or a farm, a roof turbine tops up your solar panels in winter. Tap the play pin on the turbine to start the rotor, and tap it again to stop.
2.1 m
rotor
1.5 kW
rated output
3 m/s
start-up wind
Kits
Kits we supply and fit.
Three systems in one viewer. Pick one from the strip, then tap its cart pin to see the price and add it to your basket.
Survey
Book a free home survey.
A surveyor visits, measures your rooms and your wall, and leaves you a fixed quote. No obligation.
.01
Survey
About two hours at your home.
.02
Quote
Fixed price within five working days.
.03
Install
Usually two to three days.

Fixed price
within five working days
3D Viewer Premium
How this page is built
Every 3D section on this page is the standard 3D Viewer block. The settings below use the control names you will find in the plugin.
| Section | What it uses | Settings |
|---|---|---|
| On your wall | AR (wall placement), QR code on desktop, HDR lighting, model animation | Enable AR on, Placement: Wall, Scene Viewer first. Environment Image = overcast sky HDR. Autoplay turns the fan |
| Clearances | Real-world dimensions in the viewer | Dimensions Always, mm |
| Inside | 4 Info hotspots, 1 Video hotspot, 1 Link hotspot | Hover Popup Card. The Video hotspot plays an MP4 hosted in the media library |
| Wind | Model animation started from an Animation hotspot | Animation hotspot: Spin, Loop. Autoplay off |
| Kits | 3 models in one viewer, Product hotspots, WooCommerce | Multiple models, thumbnails Left. Product hotspot to WooCommerce, plus the [products] shortcode |
| Page design | Fonts, colours, header and footer | Page CSS only. The viewer buttons and pins are restyled with CSS; the plugin settings are unchanged |
What this page does not do
- AR opens the unit at real size on your wall, but you can still pinch to resize it. It is not a survey.
- Measurements hide once AR starts, and the ruler measures the whole model, brackets included, not the clearances.
- The fan clip is a recording of this 3D model, not of a real unit.
- Prices are for the kit only. Installation is quoted after a survey.
- The survey button opens an email; there is no booking form.
Model credits
- Heat pump, wind turbine and solar panel models, and the fan clip: made by bPlugins for this demo, CC0
- Overcast sky HDR (kloofendal_overcast_puresky): Poly Haven, CC0


